存在噪声和未建模动态系统传递函数的渐近无偏估计

存在未建模动态时，如何去除系统传递函数估计中噪声引起的偏差是系统辨识关心的重要问题。本文将我们已提出的ＢＥＬＳ方法进行推广得出：当系统未建模动态可用－ＦＩＲ模型描述时，应用本文的方法可得到系统传递函数的无偏辨识，而不需知道有关噪声和未建模动态概率分布函数的先验知识。     

加强项目前期工程造价管理的主要措施

介绍了工程造价管理的定义、特点、内容及对象。阐述了项目前期工程造价管理的重要性 ,并就目前项目前期工程造价管理中投资估算编制存在的问题 ,提出了几点建议     

干涉条纹图估测基线的方法研究

根据SAR干涉测量原理，提出了利用干涉相干条纹估测基线的方法，并以欧洲空间局资源卫星1号和2号携带的SAR系统在中国新疆伽师试验区获取的串接式（Tan-dem）干涉测量数据为数据源，对提出的方法进行了验证，结果表明，该方法能有效地估测基线，并弥补不能有效获取卫星轨道参数时，对基线进行估测的缺陷，该方法尤其适用于差分干涉测量的研究。     

基于局部多项式逼近的变参数梯度估计算法

本文分析了梯度辨识算法跟踪时变系统的缺点，提出了一种新的基于局部多项式逼近的变参数梯度估计算法。本算法具有良好跟踪性能特别适用于时变系统跟踪且其对噪声的敏感程度与一般梯度估计方法相当。仿真结果验证了其良好性能。     

变差函数在地下水位估值中的应用研究

用数值方法进行地下水水资源评价时 ,需要给出每个节点上的初始地下水位值。本文着重阐述了区域化变量和变差函数及其计算步骤 ,指出变差函数在分析地下水位的空间变异的重要性     

An EM‐based adaptive multiple target tracking filter

Tracking targets of interest is one of the major research areas in radar surveillance systems. We formulate the problem as incomplete data estimation and apply EM to the MAP estimate. The resulting filter has a recursive structure analogous to the Kalman filter. The advantage is that the measurement‐update deals with multiple measurements in parallel and the parameter‐update estimates the system parameters on the fly. Experiments tracking separate targets in parallel show that tracking maintenance ratio of the proposed system is better than that of NNF and RMS position error is smaller than that of PDAF. Also, the system parameters are correctly obtained even from incorrect initial values. Copyright © 2001 John Wiley & Sons, Ltd.     

一种在Kalman滤波中引入径向速度测量的新方法

研究在距离和径向速度测量噪声统计相关的情形下把径向速度测量引入Kalman滤波的新方法。分析了径向速度测量噪声与位置测量更新后状态滤波误差的统计相关性,根据Gauss-Markov定理导出了对应于径向速度测量的滤波方程由此而得到一种序贯滤波算法。两个不同的蒙特卡罗仿真表明,通过采用这一新算法引人径向速度测量,不仅可以大大提高状态估计的精度,而且其估计性能和计算效率优于传统的EKF。     

Viscosity estimation for slags containing calcium fluoride

Based on recently published experimental data, the Riboud model was modified for viscosity estimation of the slags containing calcium fluoride. The estimated values were in good agreement with measured data. Reasonable estimation can be achieved using the modified Riboud model for mould fluxes and ESR (eletro slag remelting) slags. Especially for ESR slags, the modified Riboud model can provide much more precise values than the original Riboud model.     

Simulation of Strength Distribution in Ground Ceramics by Incorporating Residual Stress Effect

Strength of ground ceramics may be affected by residual stress as well as surface flaws induced by grinding. Strength prediction for ground ceramics is convenient for mechanical design of ceramic components. In this article, a numerical procedure based on fracture mechanics was proposed to estimate strength distribution of ground ceramics by considering grinding-induced residual stress. Bending strength and residual stress of ground ceramics were measured for three grinding-conditions. By comparison of simulated results with experimental ones, it was revealed that strength characteristics in experiments were well simulated by using the proposed procedure.